Back to home page

 Overview 
 Software Architecture
 Hardware architecture 
 Evaluation Kit 
 Hardware 
 Access Controllers
 Card Readers 
 ID Badges/Cards 
 Time Recording Terminals
 Biometric Identification 
 SW Access Control
 Access Control
 Visitor Management
 Video surveillance
 WebTS
 SW Time&Attendance
 Time Management
 Workforce Planning
 Job Costing
 SW Utilities
 Audit Log
 PIF
 TS Outlook  
 TS Express
 TS Express

 Identification cards

Our important competitive advantage is ability to integrate wide range of badge technologies. Four RFID technologies are directly supported: Indala, HID, H4000, Mifare and Legic. Other RFID technologies like Cotag, Keri and similar are available upon request.

 

HID

HID is worldwide No. 1 manufacturer of proximity card technology. As of 2nd half of 2006 Spica is gradually adpoting HID as its 1st choice. Spica supports both HID's generations of products, Classic (125kHz) and iClass (proximity smartcard). Classic line is sold as "C Line" (CXR readers and IDC cards) and iClass line as "I Line" (IXR readers and IDI cards).
 
IDI2000 - Proximity R/W card, HID iCLASS, 2Kbit, 2 applications Read more 

The card meets ISO standards for thickness for use with direct image and thermal transfer printers. Memory Capacity 2 Kbits, 2 application areas.

IDI2001 - Proximity R/W card HID iCLASS, 16Kbit, 2 applications Read more 

The card meets ISO standards for thickness for use with direct image and thermal transfer printers. Memory Capacity 16 Kbits, 2 application areas.

IDI2002 - Proximity R/W card, HID iCLASS, 16Kbits, 16 application Read more 

The card meets ISO standards for thickness for use with direct image and thermal transfer printers. Memory Capacity 16 Kbits, 16 application areas.

IDI2050 - Proximity R/W key tag, HIDiCLASS, 2KBits, 2 applications Read more 

Incorporates iCLASS contactless read/write technology into a convenient device approximately the size of an automotive key. Memory Capacity 2 Kbits, 2 application areas.

IDI2051 - Proximity R/W key tag, HID iCLASS,16Kbits,2 applications Read more 

Incorporates iCLASS contactless read/write technology into a convenient device approximately the size of an automotive key. Memory Capacity 16 Kbits, 2 application areas.

IDI2052 - Proximity R/W key tag, HID iCLASS, 16Kbits,16 applications Read more 

Incorporates iCLASS contactless read/write technology into a convenient device approximately the size of an automotive key. Memory Capacity 16 Kbits, 16 application areas.

IDI2060 - Proximity R/W adhesive tag, HID iCLASS, 2Kbits, 2 applications Read more 

Provides the convenience of HID iCLASS contactless read/write technology in a small disk-shaped package. Allows users to easily and cost effectively turn a plastic ID badge or contact smart chip card into a contactless smart card. Attaches easily to cell phones, PDAs, and other non-metallic objects. Memory Capacity 2 Kbits, 2 application areas.

IDI2061 - Proximity R/W adhesive tag, HID iCLASS, 16 Kbits, 2 applications Read more 

Provides the convenience of HID iCLASS contactless read/write technology in a small disk-shaped package. Allows users to easily and cost effectively turn a plastic ID badge or contact smart chip card into a contactless smart card. Attaches easily to cell phones, PDAs, and other non-metallic objects. Memory Capacity 16 Kbits, 2 application areas.

IDI2062 - Proximity R/W adhesive tag, HID iCLASS, 16Kbits, 16 applications Read more 

Provides the convenience of HID iCLASS contactless read/write technology in a small disk-shaped package. Allows users to easily and cost effectively turn a plastic ID badge or contact smart chip card into a contactless smart card. Attaches easily to cell phones, PDAs, and other non-metallic objects. Memory Capacity 16 Kbits, 16 application areas.

IDI2080 - Proximity R/W clamshell card, HID iCLASS, 2 Kbits, 2 applications Read more 

The card is implemented in a cost effective card package, with an ABS shell construction that provides durability in harsh environments. Memory Capacity 2 Kbits, 2 application areas.

IDC1326 - Proximity card, HID ProxCard II Read more 

The RF-programmable ProxCard II proximity access card is the industry choice for a cost-effective solution to proximity access control. Offers universal compatibility with all HID proximity readers. Provides durable packaging and consistent read range.

IDC1346 - HID ProxKey II tag Read more 

The RF-programmable ProxKey II proximity keyfob incorporates proximity technology into a convenient device approximately the size of an automotive key. Offers universal compatibility with all HID proximity readers. Can be placed on a key ring for convenient entry.

IDC1386 - Proximity card, HID IsoProx II Read more 

The RF-programmable ISOProx II proximity access card offers proximity technology and photo identification on a single access control card. Offers universal compatibility with all HID proximity readers.

Specifications are subject to change without notice. All products referred to are the trademarks of Spica International or their respective holders.

Indala

Our best selling cards come from our long-time supplier Indala, USA. Indala has been purchased in 2006 by world leading HID Corporation. Indala products will stay firmly as top brand line within HID. Spica sells Indala products as "Premium" or "P Line" (PXR readers and IDP badges).
 
IDP09 - ID badge, proximity, Indala, 1.8 mm Read more 

Badge, proximity, 1.8mm, can accept photo-flap and direct-print adhesive backed ID badge overlays.

IDP10 - ID badge, proximity, Indala, ISO Read more 

Slim (0.76 mm) proximity card. Digital photos and graphics can be printed directly over the front surface.

IDPM10 - ID badge, magstripe/proximity Indala

Slim (0.76 mm) combined proximity/magnetic card. Digital photos and graphics can be printed directly over the front surface.

IDPK10 - ID keytag, proximity, Indala Read more 

Proximity key tag, can be easily attached to a key ring, badge clip, or badge lanyard. Built to withstand harsh operating environments.

IDPTAG - ID flextag, proximity, Indala Read more 

FlexTag can be used to upgrade from magstripe, barcode or other plastic card to proximity credential by simply attaching the small, circular FlexTag to your existing card. The FlexTag will also adhere to any non-metallic device, such as a cell phone or PDA, to create an instant proximity badge.

Specifications are subject to change without notice. All products referred to are the trademarks of Spica International or their respective holders.

 

H4000

Our alternative "H" line of cards and readers is based on generic H4000 (originally from EM Marin). With its aggressive pricing, H line competes well against local and "no name" proximity brands. Specifications: RFID 125kHz, readonly, factory programmed, 40 bit, ISO7810, PVC thickness 0.76 mm, H4102 chip.
 
IDH11 - ID badge, proximity, H4000, ID printed

Slim (0.76 mm) proximity card. Digital photos and graphics can be printed directly over the front surface. With printed ID number.

IDHM11 - ID badge magstripe/proximity H4000, ID printed

Slim (0.76 mm) combined proximity/magnetic card. Digital photos and graphics can be printed directly over the front surface. With printed ID number.

Specifications are subject to change without notice. All products referred to are the trademarks of Spica International or their respective holders.

 

Mifare

Mifare is well known, easy to implement and popular smart RFID technology offered by many manufacturers. This 13.56 MHz technology supports R/W badges with 1kb, 4kb or 8kb of memory.
 
IDMF10 - ID badge, proximity, Mifare, marked

Mifare card, 1K bytes, CSN printed on card.

IDMF40 - ID badge, proximity Mifare, 4k, marked

Mifare card, 4K bytes, CSN printed on card.

IDMF1K - ID badge, proximity Mifare

Mifare card, 1K bytes, CSN not visible.

IDMF4K - ID badge, proximity Mifare, 4k

Mifare card, 4K bytes, CSN not visible.

Specifications are subject to change without notice. All products referred to are the trademarks of Spica International or their respective holders.

 

Legic

Legic (www,legic.com) is proprietary secure RFID smartcard technology. This 13.56 MHz technology combines several advanced security measures with true multi-vendor multi-application capability making it the best platform currently available for advanced smartcard applications. Spica is Legic's licensee partner.

Supports R/W badges with up to 1kb of memory.
 
IDL10 - ID badge, proximity, Legic, Kaba Benzing

IDL1024 - ID badge, proximity, Legic Prime, programmed, 1KB

IDL256 - ID badge, proximity, Legic Prime, programmed, 256B

IDLATC1024 - ID badge, Legic Advant, 1024 bytes

Specifications are subject to change without notice. All products referred to are the trademarks of Spica International or their respective holders.

 

Other

Although vast majority of systems installed today are using proximity technology, the choice does not end there. Magstripe cards are often selected for compatibility with legacy systems based on classic credit card technology. Barcode cards would be interesting in industrial environment where barcodes are used in wider context.
 
IDB09 - ID badge, barcode

Cards with pre-printed barcode for use with Time&Space. Copy protected barcode (black-on-black), infrared readable. Digital photos and graphics can be printed directly over the front surface.

IDM09 - ID badge, magnetic

Classic magnetic stripe card, ISO, Hi-Co (high coercitivity). Coded for use with Time&Space. Digital photos and graphics can be printed directly over the front surface.

IDR2 - Long range RFID tag for vehicles

Long range active tag (remote) for use with RXR2 reader. For parking barriers, garages and similar applications. Battery included. Range up to 50m, depending on installation condition.

Specifications are subject to change without notice. All products referred to are the trademarks of Spica International or their respective holders.

 

Open reader policy

Our important competitive advantage is ability to integrate wide range of card reader brands and technologies. In the past, Spica has successfully integrated cards and readers from various brands including Cotag, HID, Legic, Keri and others. Original or compatible cards can be purchased directly from Spica International. The information for a particular brand is available upon request at info@spica.com.

Open reader policy allows cards from different vendors to be used together even within the same system, which is becoming increasingly important with the proliferation of various new ID technologies and lack of standards.

 
Combined cards
Combination of various card technologies on the same card is the solution in situations where the same card is needed for different applications or used in different systems. Spica International can provide various combination of contact chipcard, proximity, magstripe and barcode cards. More information is available upon request info@spica.com.

 


Become Partner
Become Time&Space Partner
Reference Installations
Selected reference Installations
FAQ
Frequently Asked Questions
Newsletter
Subscribe to our Newsletter
Contact
Get in contact
©2007 SPICA International. All rights reserved. Terms and Conditions